Common connection methods of copper terminals

With the development trend of mechanical engineering, the utilization rate of copper terminals is getting higher and higher, and there are more and more suitable situations.
Although copper core wire terminals are a good product for connecting power lines, for better transmission and reasonable power line connection, you must master several common methods.
Common standards for copper terminal block interface:
1. Welding is the most common teaching strategy.
Important scientific research is welding-led data information, that is, connecting terminal arrangement surface and tin intermediate information, leading to the sustainability of metal materials.
For the design requirements of this connection management scheme, the terminal block should be malleable, so that students can produce better expected results.
2. Pressure connection.
This method is that the copper smart terminal is made smaller in the standard and then connected, which is more suitable for harsh environments, especially in the current area, and the smaller is the only interface standard, because this method will be more stable than welding, but pay attention Smaller is a permanent connection, only used once.
3. Cable winding.
In this way, the power lines are damaged by the winding gun and the stationary solenoid machine, which usually winds and touches the parts smoothly to create a better seal.
Few people use such sockets.
Since this method has many requirements, there are clear requirements for the diameter of the power line and the expansion of the raw materials of the power line, there are certain restrictions in use, and it is not easy to use on a large scale.


Post time: Jun-20-2022